221 Essay

1. What industry standards body and standards series numbers do you shoot to reference for Ethernet applications and cabling? The IEEE maintains the industry standards for Ethernet protocols. This is part of the 802.3 series of standards and includes application much(prenominal) as 1000base T, 1000Base 5X, 10GBase-T, and 10GBase SR.
2. What are the different examples of CAT 6 air and what should be recommend for this network? There are 2 types of CAT 6 cables CAT6 and CAT6A. I would suggest CAT6A it is better accommodate for the 10 Gigabit Ethernet.
3. What cable would you recommend to offer the best screen accomplishment? The best possible cable would be quality since EMI has no effect on fiber optics and can slow do 10GBase-T, otherwise I would use Category 6A that is s.t.p. because it would help protect against EMI and can operate at 10GBase-T networking.
4. What type of cable would you use for:
a) The horizontal spaces- Plenum Cable
b) The vertical links riser cable
5.



What would you look for in trying to find intermission if you had the undermentioned failure:
a) NEXT and FEXT problems in 1Gbps links - When finding fault in NEXT and FEXT the problem is usually too umteen twists in the cable although with NEXT the problem is at the alike(p) end of the cable that generated the signal whereas with FEXT the problem occurs at the glacial end of the cable where the signal was sent.
b) Difficulty meeting 10Gbps performance requirements - Alien Crosstalk (AXT)
As the signal rate enlarge in a cable, this form of crosstalk becomes more important. In Fact, this is a major source of interference, and a limiting factor, for rails 10GBase-T (10Gbps) over UTP cabling.If you want to get a full essay, run it on our website: Ordercustompaper.com



If you want to get a full essay, wisit our page: write my paper