Due get wind: | March 30, 2012|
Student name:| Desiree Jackson|
Process fertilize Chart: laissez passering to School
Yes
Yes
Is at that place
traffic
Is there
traffic
No
No
Walk to school
Walk to school
Wait until Clear
Wait until Clear
Walk out t
Walk to the Corner
3a) The fertilise time of the kick upstairsd items is 1.5 hours
3a.2) The hinder in the process is bread qualification as it is the process that limits the capacity of the process.
3a.3) Assembly is starving fleck the first batch is in the raw materials phase, the manufacturing phase and The work in process phase and unless the whole process is in constant rotation rotating WIP into assembly one entity at a time, then each bea is starved waiting on the other(a) batches to complete.
3a.4) In one hour the Manufacturing station is utilise 100% and the Assembly station is utilized 50%.
3b.1) The bottleneck in the process is assembly because manufacturing atomic number 50 produce 30 wholes in an hour and assembly send word only produce 10 so to maximize capacity the bottleneck in assembly has to be removed.
3b.
2) Blocking occurs between the Work in Process stage and the Assembly stage because there are 30 units produced and only 10 can be assembled indoors an hour so there leaves a surplus of 20 units that need to be stored. Starving occurs in all steps after the initial process of the day as the other phases of the process must wait for the items to complete the previous phases, since there is not a continuous cycle time.
3b.3) 1 unit can be produced in 9 minutes and 6.6 units can be produced per hour
There are 10 units left(a) in work in process since the assembly can manage 20 units per hour and the manufacturing can produce 30 units per hour.
3b.4) 480-320= 160/2=80
10/.5= 20
80/20=4
c)
4+1+.5= 5.5If you want to get a complete essay, order it on our website: Ordercustompaper.com
If you want to get a full essay, wisit our page: write my paper
No comments:
Post a Comment